Tag Archives: Tempo Treadle

Ringing out the year

The last project of the year, cotton towels is off the loom and waiting for the hemming to be done. The Spring loom is not empty though, a project to be woven in the new year is almost threaded so weaving can begin.

I had given myself permission in 2017 to improve my weaving equipment and I followed my plan. An 8 shaft Spring loom was acquired and I added 4 more harnesses giving me a total of 12 harnesses. I also added a Tempo Treadle to the 12 harness Spring and to my 8 harness Baby Mac. Now I have fewer weaving errors and can weave more complicated patterns.

The towels used 8/2 cotton, sett at 20 epi, I used a 10 dent reed with 2 ends per dent. When weaving this 12 harness shadow weave pattern Some of the towels were treadled differently. So if you compare the 2 pictures the patterns are different. Also I used different weft colors.

No new equipment is on the horizon for the coming year. Instead I will be trying to down size some of my stash and equipment no longer being used.

A Happy Creative New Year to all!

Advertisements

Innovations in Weaving – Tempo Treadle

IMG_0903In March of this year I decided to buy a Tempo Treadle  from Lofty Fiber  to create error free weaving on my Baby Macomber loom. So what is Tempo Treadle ? It involves adding  magnets to your treadles, (attached with velcro), that are detected during weaving by a sensor array strip placed below the treadles. The array strip is connected via a ribbon cable to a “System Unit” or small computer with display that sits on the castle.

IMG_4371

So what does the System Unit do? WIF files containing the weaving design are uploaded to the system unit, which also contains the system software which is customized for your loom type and model. The unit can be used to track threading also showing warp thread colors and progress. If you stop before completing your progress your place will be saved. It will list harnesses that should be tied to treadles. Allowing double checking for tie-up errors. Tracking weaving and detecting errors is my motivator to purchase.

IMG_4404

When I chose  to weave more complicated weaving, often it resulted in undetected errors or ones that required a lot of unweaving. I was beginning to wonder if it was still rewarding to weave. The Tempo Treadle has brought joy back to my weaving. It beeps when the correct treadle has been depressed and  released during weaving.  A different sounding beep is heard when the wrong harness has been depressed and released. These sounds can be adjusted or turned off. It will save my position when stepping away or turning the unit off. It allows me to now weave a long complicated treadling. The above picture of a woven Bateman Blend fabric has a treadling repeat of 104, including the tabbies.

Currently it  is not available for all types of looms. The sensor array is loom specific, but the System Unit which is purchased separately from the array can be used on any loom that  has a Sensor Array on it.
IMG_5633

When  I started this journey with Dawne and Barry from Lofty Fiber a Sensor Array had not been designed specifically for the Baby Mac. They had me make many measurements to determine placement of the sensors and Sensor Array strip to customize for the Baby Mac. The loom needed to be placed on raised legs to create space for the array under the treadles? This is only done for some loom types. The array is bracketed to the side supports so it does move. The only draw back with this arrangement is that to move the loom requires removing the Sensor Array and brackets and legs. There are many additional features to the Tempo Treadle I have not discussed that ease the weaving process, click on TempoTreadle.com to learn more.

Now to get the other 4 harnesses that I have on order for my Spring loom,  then a Sensor Array can be added to it for error free, stress free weaving too.

IMG_5644